Carbon Steel SOFF Backing Ring Flanges Manufacturer in India

ASME B16.5 / ANSI B16.47 150# & 300#

Carbon Steel Backup Flange
Carbon Steel Backing Ring Flange Manufacturer

Carbon Steel Backing Ring Flange Manufacturer

ASTM A105 Carbon Steel Backing Ring Flanges, Carbon Steel Backing Flange Exporter, ASME B16.5 / ANSI B16.47 Carbon Steel Backup Flange, CS Backing Flange, GI Backing Ring, Carbon Steel Loose Backing Flange Manufacturer, Carbon Steel BS 4504 Split Backup Flange Manufacturer in India.

Taurus Piping Solutions (TPS) is a leading Exporter, Supplier and Manufacturer of Carbon Steel Backing Ring Flange, ideally formed considering both national and international standards. Our Carbon Steel Backing Ring Flanges are a result of high-end efficiency and years of expertise, created with utmost commitment and dedication. We, as a leading entity, highly regard our consumers and pledge to provide them with top-notch quality products and hassle-free processing.

The Lap Joint Flange, which is a ring backing Flange and it is very similar in geometry to the Slip-on Flange.The combination of stub ends and backing flanges is an alternative way to join pipe compared to use of standard flanges. This solutions are used in these typical scenarios. Applications where rotating Carbon Steel backing ring flanges are preferred (to facilitate bolting).

Carbon Steel Backing Ring Flange Specification

  • Standard : AS 2129 Table D, E, F, H, J,K, R, S & T, ANSI, ASME, EN1092, JIS, SABS1123, GOST-12820, AS/NZS 4087
  • Dimensions : ANSI B16.5, ANSI B16.47, Series A & B
  • BS : BS4504, BS10
  • Class : 150 LBS, 300 LBS
  • Pressure : PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160
  • Size : ½” (15 NB) to 48″ (1200NB)
  • Type : Backing Ring Flange / Backup Flange

Carbon Steel BRF, Carbon Steel Backing Ring Flanges, Carbon Steel Backup Flange Manufacturer, Carbon Steel EN 1092-1 Backup Ring Exporter in India, Carbon Stub Flange and Backing Ring, Carbon Steel Back Up Flanges Exporter in Australia.

Our line of Carbon Steel Backing Rings Flange fit behind molded fiberglass flanges and molded PVC and CPVC flanges. These Carbon Steel backing ring flanges facilitate higher bolts torques than customarily allowed on molded fiberglass, and plastic rings. They also eliminate cracking which commonly occur on those type of molded flanges. backing ring flanges are made to most standard specification, or configuration, including any national and international standard dimensions.

If you need split flange or two piece backing ring flange for particular line in your system, you can rely on us to provide it. If we don’t have exact item you requires, we will custom manufacture it for you. We have emerged as one of the largest Exporters in various countries such as Switzerland, France, Denmark, Finland, Australia, UK, Germany, Spain, Turkey, Saudi Arabia, Jordan, UAE etc.

Carbon Steel Backing Ring Flanges Applications and Uses

Our Carbon Steel Backing Ring Flanges are used in a wide range of applications and various industries. Below are a few of them:

Power Generation
Mining Industry
Engineering & General Piping
Offshore Oil Drilling Companies
Construction & Water Pipeline
Petrochemicals & Nuclear


Other Types Of Carbon Steel Soff Backing Ring Flanges

Carbon Steel Soff Backing Ring Flange

Carbon Steel Backing Ring FlangeASTM A105 Carbon Steel Backing Ring FlangesASME B16.47 CS Backing Ring FlangeCarbon Steel BS 4504 Backing Ring FlangesCS EN 1092-1 Backing Ring FlangeASME SA105 Carbon Steel Backing Ring FlangeGI Backing Ring

Carbon Steel Backup Flanges

Carbon Steel 16.5 Soff Ring FlangeCarbon Steel Soff Ring FlangeCarbon Steel Backing Ring FlangesCS Backing Ring FlangeCarbon Steel BRFAS/NZS 4087 PN16 Carbon Steel Backing Ring FlangesGalvanised Backing RingHot Dip Galvanised Backing Ring Galvanised

Documentation & Packaging

Commercial Invoice including HS Code

Packing List including Complete Details

Certificate of Origin legalized

Material Traceability Records

Quality Assurance Plan (QAP)

Heat Treatment Charts

Material Test Certificates (MTC)

NABL approved Laboratory Test Reports

Material Testing

Mechanical Testing Such as Tensile of Area

Hardness Test

Chemical Analysis – Spectro Analysis

Positive Material Identification – PMI Testing

Flattening Test

Taurus Piping Solutions is ISO Certified Manufacturers and Suppliers of Carbon Steel Backing Ring Flanges: Weld Neck Backing Flange, BS4504 PN10/PN16 Backup Ring, BS10 Table D & Table E Backup Flange, ASA 150 Back Up Flanges, Carbon Steel Stub Flange and Backing Ring, Loose Backing Flange, Backing Ring For PVC Flange, Backing Flange PP-Steel, Backup Flange Dimensions, Split Backup Flange, Convoluted Flange/ Backup Ring, Backing Flange and Stub End, Backing Flange and Collar, ANSI Backing Flange, Carbon Steel Backing Flange Size Chart, PN16 Backing Flange Dimensions, Backing Ring For Stub Flange, IPS Backing Flange, Flange Backing Plate, Backing Flange Standard, 2 Piece Backing Flange, 4 Inch Backing Flange, Flange Adapter With Backing Ring in Australia, New Zealand, Middle East, USA, South Africa, UK.